-
Three reasons for the low temperature of the second-hand evaporator
The evaporator is generally composed of a preheater, a steam heat exchanger, a gas-liquid separator, a control system, a cleaning system, and a vacuum system. The main function is to use the liquid lo
2021/10/29 admin 29
-
Causes and solutions for phase loss and abnormality of second-hand compressor power supply
A second-hand compressor is a driven fluid machine that upgrades low-pressure gas to high-pressure gas, and is the heart of the refrigeration system. It sucks in low-temperature and low-pressure refri
2021/10/29 admin 40
-
How to choose a second-hand air compressor
Want to buy a suitable second-hand air compressor, it depends on whether it has economy, reliability and safety. Today, Aijiuku will talk to you about a few tips for buying second-hand air compressors
2021/10/29 admin 30
-
Does the air compressor have to be equipped with a gas storage tank?
The gas storage tank is simply a tank for storing compressed air. Many people are asking whether the air compressor should be equipped with a gas storage tank, and the answer is that it needs to be eq
2021/10/29 admin 24
-
![How to heat a second-hand reactor]()
How to heat a second-hand reactor
The working temperature of the reactor is relatively high, and chemical reactions usually need to be carried out under certain temperature conditions, so the reactor is subjected to pressure and temperature at the same time.
2021/10/28 admin 18
-
![Five common failure modes of second-hand reactors]()
Five common failure modes of second-hand reactors
Under normal circumstances, the phenomenon that the product loses the specified function is called failure, and the failure of the pressure vessel is the loss of the ability to work normally due to pressure or other loads exceeding the service limit.
2021/10/28 admin 21
-
![Two methods for cleaning high pressure hydrogenation reactor]()
Two methods for cleaning high pressure hydrogenation reactor
Nowadays, high-pressure hydrogenation reactors are gradually developing towards large-scale and environmental protection
2021/10/28 admin 14
-
![The correct way to replace the main bearing of a second-hand centrifuge]()
The correct way to replace the main bearing of a second-hand centrifuge
As we all know, the main bearing is an important component of the second-hand centrifuge, which affects the processing efficiency.
2021/10/27 admin 9
